MTD series PID temperature controller is a cost effective pid controller offers basic features that will suit a lot of basic temperature control needs, works with TC/RTD inputs, and equipped with Relay and SSR drive output at the same time, the output is field selectable, if the actuator is a conventional relay or AC contractor, then choose the relay output, if the system has a solid state relay, then choose the SSR drive output, it's a great choice to have, maximum 2 alarms, working on wide power source from 85~265VAC or 24VDC. RS-485 modbus is avaiable on request.

MTA series PID temperature controller is a programmable pid temperature controller offers solutions for most of application, this controller works with Thermocouple, RTD(PT100) and Analog signal like 0-10VDC, 4-20mA etc, it's a true universal input controller which works with all inputs, Relay, SSR Drive output and analog outputs are optional upon order, add-on features like RS-485 and Process re-transmission is avaiable on request. Compatible with wide range of power source from 85~265Vac.

FT series PID temperature controller is similar to other controllers we have but offers more options, items works with thermocouple and RTD inputs, comes with Relay, SSR Drive, or 4-20mA, 0-10VDC output, maximum 2 alarms avaiablel, standard version works on 85~265Vac, and 24VDC/AC source optional when order, apart from these standard features, this controller also has some unique features like soft-start for analog output which is pretty useful for some of application where the load needs to be protected from drastic increase power load, process value re-transmission and remote setting point, RS-485 modbus communication which makes this controller has the ability to handle different situations.

This is a single phase SCR power regulators and temperature controllers 2 in 1 units, in a typical heating system, you would need a temperature controller and a SCR power regulators, and they are two separate devices, we go further and build this two devices in one package, this saves a lot of efforts for panel builders when it comes down to wiring, and RS-485 modbus is a standard feature, controller can be integrated to systems with HMI or PLC etc. the load can be directed wired to this thyristor power regulators, and it works with all kinds of inputs, Thermocuple, RTD, analog signal

This thermal controller offers some basic features with limited configuration options, it is for much less demanding application, despite it's cost-effective nature, still it offers Relay, SSR Drive and analog output, analog output being at the same price with the relay and SSR Drive output, maximum 2 alarms and heating+cooling control at the same time are possible, the alarm output can be used as a sub output to control a fan or valve in a system, TC/RTD and analog inputs compatible, 24VDC source and 85~265Vac source optional

REX C100, C400, C700, C900 is a very popular controller on the markets, comes with relay or SSR Drive output, with 1 alarm and works on wide range of power supply, works with thermocuple and RTD inputs despite the cost being very competetive.

CH102, CH402, CH702, CH902 is a very popular controller on the markets, comes with relay and SSR Drive output, relay and SSR Drive output at the same time, faciliated wiht different terminals, if you want to use the relay output, then connect your AC contractor or SSR with the relay output terminal, if you want to use SSR drive output, then connect your solid state relay with SSR Drive output terminal, with 1 alarm and works on wide range of power supply, works with thermocuple and RTD inputs despite the cost being very competetive.

FT100-601/602 is a process indicator which accepts thermocouple, RTD and analog signals, the standard version works with TC/RTD inputs, and specify the analog inputs if the input is analog like 0-10VDC, 4-20mA etc, the display can be either in Celcius or Fahrenheit, maximum 3 alarms can be selected for large sizes, 24VDC auxiliary power supply is possible to power transduers like presure transmitters, process value can also be re-transmitted to feed to PLC or paperless recorders, RS-485 modbus communication available to be abled to connected with PLC and HMI

Maxwell MTC-V is VMD(valve motor drive) output temperature controller, incorporates 3-point stepping valve control feature, two relays, one control the open of the valve, one control the close of the valve, valve position indication, auto/manual control bumpless transfer, works with thermocouple, RTD, and analog inputs,

Maxwell DR04C is a din rail mount PID temperature controller, 2 channel configuraitons, works with TC/RTD inputs, and output can be Relay, SSR Drive, or analog like 4-20mA, 0-10VDC, 2 auxiliary outputs can be assigned as the alarm output for any of the channel, or it can also be configured as the cooling output, in some particular application, the auxiliary output can also be programmed as an event output which is controlled by a master device via RS-485 communication, the RS-485 is a standard features. 24VDC source to sure greater saftey.

IoT is getting more and more popular, to keep up with the trend, for some of temperature control system with PLC in it, we offer an alternative solution by using our DIN rail temperature controller plus our IoT box, or IoT HMI, the concept is implementing DIN rail temperature controller system and connect it with IoT HMI plus various I/O modulars, so that the PLC can be eliminated from the system, 

Maxwell DR04D is a din rail mount PID temperature controller, 4 channel configuraitons, support thermocouple inputs(K,E,J,N,W,S,T,R,B), and output can be Relay, SSR Drive, or analog like 4-20mA, 0-10VDC, PID or ON/OFF control mode, RS-485 modbus communication as standard features, 24VDC source for greater saftey, auto/manual control switchable, when you have a sensor failure, the system can be quickly switched to manual control mode to maintain the temperature, soft-start and run/stop features.

Maxwell DR02B is a din rail mount PID temperature controller, 2 channel configuraitons, support thermocouple inputs(K,E,J,N,W,S,T,R,B), and output can be Relay, SSR Drive, it's a very simple din rail mount ccontroller, PID or ON/OFF control mode, RS-485 modbus communication as standard features, 85~265Vac source for easy system intergration, auto-tuning for both loops and with an external plug and play external configruation devices. the field configuration will be very easy to carry out.

FTX00-610 is a PID temperature controller with built-in timer, works with thermocuple and RTD inputs, relay output for timer, it's ability to maintain the tempearture at preset time duration is the key features of this item, when temperature reach to SV, the timer will be triggered automatically and starts to counting, when the time duration elapsed, a relay will pull-in and generate a dry contact signal. RS-485 modbus communication is optional, 24VDC/AC souce is optional as well.

Maxwell DR04E is a din rail mount 4 input 4 relay outputs I/O modules, input can be dry contact or NPN input, 4 relay output can be controlled from master device like HMI or PLC, the input work independently apart from output, or the input can be programmed to work correlated with the output. 8 channel of timer incorporated.

FTX00-B612 is a PID temperature controller with built-in timer, what it does is pretty straight forward, for application with time and temperature invovled, the timer will most likely to kick-in when temperature reach the setting value, for example, the setting value is SV, the process starts at the ambient temperature and temperature goes up to setting value, when temperature reach setting value, the timer start to counting down or up and hold the temperature at the SV for a preset time duration. this is very useful and widely being used in equipments like water bath, sterilizer, beer brewing, power oven coating machine etc. the maixmum time range 9999 minutes