MF43H is a touch screen ramp and soak controller, the conventional ramp and soak controllers or some call it profile controllers on the markets are configured via set buttons on the front panel. end user have to go through layers upon layers of parmaeters and navigate through different parameter during the configuration process. the process could be painful and stressed and often times lead to less efficient and frustration. the configuration with our touch screen ramp and soak controller is much more easier, it's easier for end user to pick up the process as they operate the controller like a cell phone. below are some of the basic features with this touch screen ramp and soak profile controller

MF43HYC is a touch screen ramp and soak controller, accessible from PC and cell phone, works with both android and IOS system, built-in datalogging features, and data can be downloaded to PC, this item is perfect control solution for Experimental furnace, ceramic kiln, porcelain oven, Pottery oven, jewelry casting oven etc, the conventional ramp and soak controllers or some call it profile controllers on the markets are configured via set buttons on the front panel. end user have to go through layers upon layers of parmaeters and navigate through different parameter during the configuration process. the process could be painful and stressed and often times lead to less efficient and frustration. 

MTD series PID temperature controller is a cost effective pid controller offers basic features that will suit a lot of basic temperature control needs, works with TC/RTD inputs, and equipped with Relay and SSR drive output at the same time, the output is field selectable, if the actuator is a conventional relay or AC contractor, then choose the relay output, if the system has a solid state relay, then choose the SSR drive output, it's a great choice to have, maximum 2 alarms, working on wide power source from 85~265VAC or 24VDC. RS-485 modbus is avaiable on request.

MTA series PID temperature controller is a programmable pid temperature controller offers solutions for most of application, this controller works with Thermocouple, RTD(PT100) and Analog signal like 0-10VDC, 4-20mA etc, it's a true universal input controller which works with all inputs, Relay, SSR Drive output and analog outputs are optional upon order, add-on features like RS-485 and Process re-transmission is avaiable on request. Compatible with wide range of power source from 85~265Vac.

FTX00-610 is a PID temperature controller with built-in timer, works with thermocuple and RTD inputs, relay output for timer, it's ability to maintain the tempearture at preset time duration is the key features of this item, when temperature reach to SV, the timer will be triggered automatically and starts to counting, when the time duration elapsed, a relay will pull-in and generate a dry contact signal. RS-485 modbus communication is optional, 24VDC/AC souce is optional as well.

FTX00-B612 is a PID temperature controller with built-in timer, what it does is pretty straight forward, for application with time and temperature invovled, the timer will most likely to kick-in when temperature reach the setting value, for example, the setting value is SV, the process starts at the ambient temperature and temperature goes up to setting value, when temperature reach setting value, the timer start to counting down or up and hold the temperature at the SV for a preset time duration. this is very useful and widely being used in equipments like water bath, sterilizer, beer brewing, power oven coating machine etc. the maixmum time range 9999 minutes

Maxwell CP48T,CP72T,CP96T,CP49T is a 2 in1 temperature controller with timer, time and temperature are two variables that often involved in a heating relateble applications, a typical application such as heat press printing, food and beverage process, the timer and controller are actually two devices and built-in one