Analong Input Single Phase SCR Power Regulator

● Single phase high accuracy SCR● Support all kinds of analog signal● 220Vac or 380Vac load● From 40 amps up to 200 amps● Phase angle firing control

● Single phase high accuracy SCR● 0-10V/4-20mA/0-5V/Potentiometer input● 220Vac or 380Vac load● From 40 amps up to 200 amps● Phase angle firing control

● Single phase high accuracy SCR● Support all kinds of analog signal● 220Vac or 380Vac load● From 10 amps up to 200 amps● Phase angle firing control

● Single phase high accuracy SCR● 0-10V/4-20mA/0-5V/Potentiometer input● 220Vac or 380Vac load● From 40 amps up to 200 amps● Phase angle firing control

● Potentiometer input SCR● 500K, 1000K potentiometer● 24~480Vac load● From 10 amps up to 120 amps● 500K for 220Vac● 1000K for 480Vac

FTX00-610 is a PID temperature controller with built-in timer, works with thermocuple and RTD inputs, relay output for timer, it's ability to maintain the tempearture at preset time duration is the key features of this item, when temperature reach to SV, the timer will be triggered automatically and starts to counting, when the time duration elapsed, a relay will pull-in and generate a dry contact signal. RS-485 modbus communication is optional, 24VDC/AC souce is optional as well.

IoT is getting more and more popular, to keep up with the trend, for some of temperature control system with PLC in it, we offer an alternative solution by using our DIN rail temperature controller plus our IoT box, or IoT HMI, the concept is implementing DIN rail temperature controller system and connect it with IoT HMI plus various I/O modulars, so that the PLC can be eliminated from the system, 

Maxwell DR04D is a din rail mount PID temperature controller, 4 channel configuraitons, support thermocouple inputs(K,E,J,N,W,S,T,R,B), and output can be Relay, SSR Drive, or analog like 4-20mA, 0-10VDC, PID or ON/OFF control mode, RS-485 modbus communication as standard features, 24VDC source for greater saftey, auto/manual control switchable, when you have a sensor failure, the system can be quickly switched to manual control mode to maintain the temperature, soft-start and run/stop features.